WPG P110C04DC, Руководство по эксплуатации

Страница: 5 / 36

Product
Description
Designed for use with hoisting equipment, P1-04DC lifters support loads using vacuum and manipulate
loads using manual 180° rotation and manual 90° tilt motions.
Model
Number
P110
C
04DC P1
HV11
04DC P11104DC
Vacuum Pads:
1
1...... Available with other rubber compounds for special purposes (see www.WPG.com ).
(4 each, standard rubber)
10" [25 cm] nom. diameter, con-
cave (Model G0750)
10" [25 cm] nom. diameter,
lipped (Model HV11)
11" [28 cm] nom. diameter,
lipped (Model G3370)
Pad Spread
(to outer edges)
49" x 10"
[125 cm x 25 cm]
50" x 11"
[127 cm x 28 cm]
51" x 12"
[130 cm x 30 cm]
Maximum Load
Capacity
2
2...... The Maximum Load Capacity is rated at a vacuum of 16" Hg [-54 kPa] on clean, smooth, nonporous flat surfaces with a friction coefficient of 1. Pad
compound, load rigidity, strength, surface conditions, overhang, angle, center of gravity and temperature can also affect the lifting capacity. A “qualified
person” should evaluate the effective lifting capacity for each use (see definition under “Rated Load Test” on page 24).
Per-Pad
150 lbs [68 kg] 150 lbs [68 kg] 175 lbs [80 kg]
Overall
600 lbs [270 kg] 600 lbs [270 kg] 700 lbs [320 kg]
Lifter
Weight
90 lbs [41 kg]
Power
System
12 volts DC, 3
.5
amps
Battery
Capacity
7 amp-hours
Rotation
Capability
Manual, 180°, with latching at each ¼ turn (when required)
Tilt
Capability
Manual, 90°, with automatic latching in vertical position
Operating
Elevation
Up to 6,000' [1,828 m]
Operating
Temperatures
32° — 104° F [0° — 40° C]
Service
Life
20,000 lifting cycles, when used and maintained as intended
3
3...... Vacuum pads, filter elements and other wear-out items are excluded.
!!–CE–!!
This symbol appears only when a CE Standard is different from other applicable standards. CE requirements are
mandatory in the European Union, but may be optional elsewhere.
ASME Standard
BTH-1
Design Category "B", Service Class "0" (see www.wpg.com for more information)
Rev 29.0/11-19 P1-DC: #35111 3
SPECIFICATIONS