WPG N10TAIR, Инструкция по эксплуатации

Страница: 12 / 18

Rev 4.0/8-17 10 N4950/N10TAIR: #35105
T
O
R
ELEASE THE
H
AND
C
UP FROM THE
L
OAD
WARNING: Load must be fully supported before releasing vacuum pad.
Use correct lifting technique to lower the load to the ground or a stable support. When the load
is at rest and fully supported, push the vacuum release button until the vacuum pad disengages
completely from the load. Then move the hand cup away. Continue to hold the release button
until the pad is well away from the load; otherwise, the hand cup would reattach itself to the
load.
A
FTER
U
SING THE
H
AND
C
UP
Disconnect the hand cup from the compressed air line or turn off the compressed air supply, as
appropriate.
CAUTION: Do not set the hand cup against any surfaces which could soil or damage
the vacuum pad.
Use the carrying case or pad cover when storing the hand cup or transporting it to another
location.