woundwo PLEATED BLIND, Инструкция по эксплуатации

Страница: 6 / 10

www.woundwo.com
6 PLEATED BLINDS
4. VENTILATION AND AERATION
To avoid thermal breakage of glass and the build-up of condensation, sufficient aeration and ventilation of the room, the correct selection of
glass and professional installation are all required.
We would like to point out that insufficient ventilation and aeration may cause a build-up of condensation and also a build-up of heat.
We cannot accept any guarantees for pleated blinds that have been damaged in such a manner. This also applies to glass breakages as a
consequence of heat build-up or unsuitable characteristics of the glass.
DRYING
Pull the curtain and the
system together. Allow the
water to drip out by gently
pressing together the
pleated blind system.
Position the wet pleats
on the holding clips and
clip into the holding clips
by slightly tilting the rail.
12
6
3 9
Allow the pleats to dry for
approx. 12 hours whilst pulled
together.
TIPS:
• The motor components of electric systems must NOT come into contact with water!
• The curtain must not be ironed.
• Please do NOT use any alkaline cleaning agents when cleaning the windows.
• No warranties can be upheld for damage to fabric caused by cleaning agents, condensation or insect excrement.
• When cleaning glass and window frames, care must be taken to ensure that no water or strong cleaning agents come into contact with the
fabric on the pleated blinds.
7 8 9