Wottan motor STORM-T 125cc 2022, Руководство пользователя

Страница: 64 / 77

Wottan Storm-T 2022 User Manual Page / 64
Wearing parts Wear limits
Tyres, tubes, rims Depending on driving style, load and tyre pressure, the wear limit can be reached after only 500 km or even earlier.
Wheels, hub bushing
Depending on driving style, load and tyre pressure, the wear limit can be reached after only 1500 km or even earlier. Check
during every maintenance. Rust is a lack of maintenance!
Oils, air filter, inspection for engine leaks During the first inspection, then at every service interval (every 3000 km/6000 km). Check the oil level before each trip.
Spring fork, spring strut Cleaning / inspection during each maintenance.
Lamps, incandescent bulbs, electrical system.
electrical system.
Depending on the road surface conditions/levels, the lifetime will be reduced, this may occur after 500 km.
Brake linings, brake pads, brake lines Depending on the driving style and load, these can wear out after 1500 km or even earlier.
Pedal rings, sealants, gaskets Must be replaced during each maintenance interval to ensure proper function.
Radial seals on engine, gearbox, fork and wheels
Depending on road conditions and care, wear may start after 500 km. Dirt reduces the life time.
Do not clean at high pressure!
Wheel bearings, steering bearings
Depending on the road conditions, wear can start after 1500 km, soiling of the axle reduces the service life. Dirt on the hub
reduces the service life.
Check at every maintenance interval, do not clean at high pressure!
Swing arm bearing Depending on load and care after 1500 km, check with every maintenance.
Wires Depending on load and care after 1500 km, check with every maintenance.
Coatings Plastic parts will be damaged by caustic cleaning agents, penetrants or solvents.
WEAR PARTS LIST