TANDA Color Steam Sterilizer Operation Manual
Rev-C Page 13 of 17
①
②
③
6
、
Light of “END” will be lighted up when the program ends, when it releases automatically to
the safe pressure below 0.1 bar,
①
Manually press the release button to open, or rotate the handle to the door-opened position,
the program will automatically open the exhaust valve
；
②
Wait for about 2-3min, then open the door
；
③
Press the Dry key to start the drying function, dry light flashes, when the drying indicator light
turns to be always bright, drying process finished
；
④
Please take the instruments out with tools and then turn off the power switch.
5.3 Drying Function Setting
1. If you have not pressed DRY button to start the automatic drying function before you start
the program, there will not be a drying process. After the process of exhaust, the END light is
always on, the pressure window shows the real-time pressure, the temperature window
alternately displays the real-time temperature and "
", indicating the end of the program.
You can open the release valve, wait for 2-3 minutes, then open the door to take out the items.
2.
Before starting the sterilization, if the DRY button is pressed in advance to start the automatic
drying function, the program will automatically complete 20 min of drying process after the end
of sterilization. In the drying stage, DRY lights flashes, END light flashes, and pressure window
displays real-time pressure, temperature window alternately displays real-time temperature and
"
".
