7
Technical data
Voltage
110V~50Hz
Power input
250W
Oscillating speed
11000-20000/min
Oscillating angle
3.2°
Protection class
/II
Machine weight
1.4kg
Noise information
A weighted sound pressure
L
pA
: 79dB(A)
A weighted sound power
L
wA
: 90dB(A)
K
pA
& K
wA
3.0dB(A)
Wear ear protection when sound pressure is over
80dB(A)
Vibration information
Vibration total values (triax vector sum) determined according to
EN 60745:
Typical weighted vibration
Vibration emission value
a
h
= 3.94m/s
2
Uncertainty K = 1.5m/s²
•
•
•
•
•
•
Warning:
The vibration emission value during actual use of the
power tool can differ from the declared value depending on the ways
in which the tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and
in good condition.
The tightness of the grip on the handles and if any anti vibration
accessories are used.
And the tool is being used as intended by its design and these
instructions.
This tool may cause hand-arm vibration syndrome if its use is
not adequately managed.
Warning:
To be accurate, an estimation of exposure level in the
actual conditions of use should also take account of all parts of the
operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
Maintain this tool in accordance with these instructions and keep well
lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
0
C or less.
Plan your work schedule to spread any high vibration tool use across
a number of days.
•
•
•
•
•
•
