11
and place it on again.
MOUNTING THE SUCTION DEVICE (See C1-D2)
When vacuuming, mount the suction device as shown in C1-D2.
Note:
Using the sanding pad perforated. You can only do the
vacuuming after fitting the dust collector.
OPERATING THE ON/OFF SWITCH
Start the machine, push the On/Off switch
(13)
forward so that the
“I” is indicated on the switch.
To switch off the machine, push the On/Off switch
(13)
toward the
rear so that the “0” is indicated on the switch.
USING THE VARIABLE SPEED CONTROL
Select oscillation frequency (speed) while the motor is running.
The variable speed control
(14)
can be used to set the optimum
oscillating frequency according to the accessories used and the
respective application.
High oscillation frequency:
Sanding, sawing, rasping and polishing stone and metal.
Low oscillation frequency:
Polishing varnishes.
SANDING
Typical application: wood, metal; small areas, especially corners,
edges and places difficult to access.
Select high oscillation frequency.
Sand with a constant movement and light pressure.
Heavy pressure does not increase the removal – the sanding sheet
merely wears faster.
4
5
6
7
E
C3
D2
D1
