6
18
and shock the operator .
Always wear a dusk mask when performing an operation.
Warning:
If a small amount of electrolyte should leak from the
battery pack under extremes of temperature or after heavy use, then
wash off immediately from your skin and hands using clean water. In
case of contact with the eyes rinse, rinse thoroughly with clean water
and seek medical treatment immediately.
The base plate must always be held firmly against the material
being cut to reduce saw vibration, blade jumping and blade
breakage.
- If possible, ensure the workpiece is firmly clamped to prevent
movement.
- Never stop the cutting blade by applying side pressure to the blade.
- Only withdraw the blade from the cut when the blade has stopped
moving.
- Only use blades in excellent cutting condition.
Warnings for the charger:
1. Before using the tool, read the instruction book carefully.
2. Charger is for indoor use only. Do not expose to rain or water.
3. Do not charge non-rechargeable batteries.
4. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Symbols
To reduce the risk of injury, user must read instruction
manual
Warning
Wear dust mask
Wear eye protection
Wear ear protection
Indoor use only
Do not expose to rain or water
Do not burn
Always charge the battery pack between temperatures
0
o
C to 30
o
C
1hour charging time
