Worx WU427.1, Инструкция по безопасности и эксплуатации, Страница: 8 / 20

8
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value:
Cutting wood: a
h,W
= 6.82m/s
2
Uncertainty K = 1.5m/s²
Cutting metal: a
h,M
= 5.63m/s
2
Uncertainty K = 1.5m/s²
Warning: The vibration emission value during actual use of the power tool can differ from the
declared value depending on the ways in which the tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
Warning: To be accurate, an estimation of exposure level in the actual conditions of use should also
take account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle but not actually doing the job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
°
C or less
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
TCT blade: 24T for wood (WA5076) 1
HSS blade: 60T for thin sheet steel and aluminum, PVC pipe, plastic (WA5077) 1
Diamond disc: 60G for concrete, marble, tile , cement backerboard (WA5078) 1
Parallel guide 1
Vacuum adaptor 1
Hex key 1
We recommend that you purchase your accessories from the same store that sold you the tool. Use
good quality accessories marked with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can
assist you and offer advice.