12
1 - 4
for driving small screws
5 - 8
for driving screws into soft material
9 - 12
for driving screws into soft and hard material
13 - 16
for driving screws into hard wood
17 - 21
for driving larger screws
for heavy drilling
leD liGHt (10)
The LED light allows you to keep a clear view under less illuminated
circumstances. To turn on the light simply press the on/off switch.
When you release the on/off switch, the light will be off.
aUtoMatic SPiNDle lock (See fig.e)
The automatic spindle lock allows you to use the drill as a regular
screwdriver. You can give an extra twist to firmly tighten a screw,
loosen a very tight screw or continue working when the battery
energy has expired. For manual screwdriver purposes, the chuck is
automatically locked when the tool is off.
DrilliNG
When drilling into a hard smooth surface, use a center punch to mark
the desired hole location. This will prevent the drill bit from slipping
off center as the hole is started. Hold the tool firmly and place the tip
of the bit at the point to be drilled. Depress the switch trigger to start
the tool. Move the drill bit into the workpiece, applying only enough
pressure to keep the bit cutting. Do not force or apply side pressure
to elongate a hole.
tungsten carbide drill bits should always be used for
7
8
9
B
A
C
D
E
