13
screws into hard wood will use up the battery pack energy faster than
lighter working conditions. Do not re-charge your battery pack below
0
o
C and above 45
o
C as this will affect performance.
Maintenance
remove the battery pack from the tool before carrying out any
adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use
water or chemical cleaners to clean your power tool. Wipe clean with
a dry cloth. Always store your power tool in a dry place. Keep the
motor ventilation slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation slots. This is
normal and will not damage your power tool.
Environmental protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authorities or retailer for recycling advice.
concrete and masonry. when drilling in metal, only use HSS
drill bits in good condition. always use a magnetic bit holder
(not included) when using short screwdriver bits. when screw-
driving, apply a small quantity of liquid soap or similar to the
screw threads to ease insertion.
Problem solution
1. wHy DoeS tHe Drill Not tUrN oN wHeN yoU PreSS
tHe SwitcH?
The forward/reverse rotation control, which is on top of the trigger, is
positioned in the lock function. Unlock the forward/reverse rotation
control by putting it into the required rotation position. Push the
trigger and the drill will start to rotate.
2. tHe Drill StoPS Before tHe Screw iS coMPletely
tiGHteNeD. wHy?
Verify the torque position of the torque adjusting ring, you can find the
torque-adjusting ring between the chuck and the drill body. Position
1 is the lowest torque (screw driving force) and position 21 is the
highest torque (screw driving force). Position 22 is for drill operation.
Regulate the torque adjusting ring to a higher position to reach the
best result.
3. reaSoNS for DiffereNt Battery Pack workiNG tiMeS
Charging time problems, having not used a battery pack for a
prolonged time will reduce the battery pack working time. This can be
corrected after several charge and discharge operations by charging
& working with your drill. Heavy working conditions such as large
