11
Gear i
Low speed range: for screwdriving or working with large drilling
diameter
Gear ii
High speed range: for working with small drilling diameter
warning: to prevent gear damage, always allow the chuck
to come to a complete stop before changing the direction of
rotation or the two-speed gear control.
cHUck aDJUStMeNt
To open the chuck jaws rotate the front section of the chuck. Insert
the drill bit between the chuck jaws and rotate the front section in
the opposite direction. Ensure the drill bit is in the center of the chuck
jaws. Finally, firmly rotate the front chuck section in the opposite
directions. Your drill bit is now clamped in the chuck.
torQUe aDJUStMeNt (See fig.D)
(Screw driving force of your drill driver)
The torque is adjusted by rotating the torque adjustment ring. The
torque is greater when the torque adjustment ring is set on a higher
setting. The torque is less when the torque adjustment ring is set on
a lower setting.
When drilling in wood, metal, plastic and screwdriver choose the drill
position .
Make the setting as follows:
5
6
B
A
C
D
E
