Worx WG602, Руководство пользователя, Страница: 10 / 24

10
Electric Pressure Washer EN
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the instruction
book carefully.
INTENDED USE
The electric high pressure washer is intended for residen-
tial cleaning projects-from porch to patio, driveways and
decks, boats, pavers, bricks, BBQs and more.
ASSEMBLY & OPERATION
ACTION FIGURE
ASSEMBLY
Attach the lance to the wand.
Note:
when attaching, align the
two projections on the lance with
the grooves on the wand.
See Fig. A1 A2
Screw& Unscrew the high
pressure hose
Note:
Make sure the hose is
tightly connected.
Note:
For convenience of
unscrewing the hose, please
pull the trigger to drain water
from wand when operation is
completed and switch is in “O”
position.
See Fig.
B1,B2,B3,B4
Attach the garden hose
Connect one end of the home
garden hose (not supplied) to
the adapter and another end to
waterspout.
See Fig. C
OPERATION
Extension cord
It is not recommended to use
the extension cord. If neces-
sary, ensure the plug and ex-
tension cord connection is on
an elevated surface that does
not contact the water area.
See Fig. D
GFCI plug test
Press “test”, the light will be out.
Press “reset”, the power regains
and the light will illuminate.
Note: To keep good operation
of GFCI, please implement it
once a month.
See Fig. E
START/STOP
Turn on the water supply tap.
Connect the washer to the power
supply and turn the switch to
“I”position. Then press trigger
Note: Before pressing
trigger,Push the lock-out
down into
the trigger.
WARNING: Do not start
the machine without
connecting and
turning on the water supply
because it may cause damage
to high pressure seals and
reduce the service life of
pump.
See Fig. F1,F2
Release the trigger and turn the
switch to “O”position. Turn Off
the water supply tap
Note:When not in use, Push
the lock-out up until it clicks
into the slot.
See Fig.G1,G2
Select the right nozzles
Select the suitable nozzle for
different cleaning jobs.
Nozzle 40
0
(white) is applicable
for cleaning on wooden and
other soft objects .
Turbo nozzle is applicable for
cleaning concrete, bricks and
masonry.
WARNING: Do not
change the nozzle
pattern when the tool is
powered on.
See Fig.H
Cleaning
Begin with the nozzle 1-2ft away
from the surface and approach
with caution until it reaches the
desired position for overly close
spray may do harm to surface.
WARNING : Do not
connect the machine to
water supplies that are dirty,
rusty, muddy, or corrosive.
(Including window cleaning
liquids, plant foods, or fertilizers
etc.)
See Fig. I
Using the power cord holder
To wind the power cord, turn the
holders outwards. To unwind the
power cord, pull out the holders
and turn them inwards
.
See Fig.J1,J2
ATTACHMENT OF
ACCESSORIES
Note : Do not attempt to use the washer with no
lance or accessories attached.
Soap bottle (sold separately)
Soap bottle provides detergent suds for deeper cleaning of
dirt. (See Fig. K)