Worx S Basic LANDROID, Руководство пользователя

Страница: 19 / 20

Owner’s Manual of Lawn Mowing Robot EN
19
The charging time is far more
than 2h.
Poor connection caused by debris on
the Charging Strip.
Clean the Contact Pins located on the
Charging Base and the Charging Strip on
Landroid
®
using a cloth.
The charging protection program has
activated due to high temperature. Place the charging base in a shady area or
wait until the temperature has cooled down.
The mower does not charge.
There is no power.
Check the power cord is connected properly
to the charger and the charger is connected
to a suitable power supply.
Does not operate correctly while
manually charging.
Refer to manual charging.
Landroid
®
is starting to have
shorter run-times between
charges.
Something is clogging in the Blade
Disc. Take off the Blade Disc and clean it
The grass is too high and too thick.
Landroid
®
is shaking heavily.
Check the Blade Disc and blades, remove
debris and foreign objects from the blades
and Blade Disc.
The battery may be exhausted or old. Replace battery.
Landroid
®
is not operating at the
correct time.
The clock is not set to the correct
time. Set the clock to the correct time by removing
and installing the battery pack.
Programmed cutting times for
Landroid
®
are not correct.
Change the time settings for the mower to
start and stop.
Landroid
®
cannot correctly dock
with the Charging Base
Environmental influences Restart Landroid
®
.
Poor connection caused by debris on
the Charging Strip.
Clean the Contact Pins located on the
Charging Base and the Charging Strip on
Landroid
®
using a cloth.
The Green light on the Charging
Base turns ON before charging
is complete.
The charging base is overheating, the
battery indication light flashes red. Place the charging base in a shady area or
wait until the temperature has cooled down.
Landroid
®
runs outside the
boundary wire. Landroid
®
does
not mow an area within a
boundary wire zone. Landroid
®
reverses or rotates erratically
near the boundary wire.
The boundary wire of another
Landroid
®
or another robotic mower is
positioned too closely.
Ensure your Landroid
®
Boundary Wire has at
least 1m of space between the neighboring
boundary wire.
The boundary wire has been installed
with tight corners. Check the boundary wire to ensure the
corners are smooth.
In wet conditions, the boundary wire
electric signal may leak where wire
has been joined or repaired.
Check boundary wire joints. Insulate to
provide a fully waterproof connection.
There is boundary wire electric signal
leakage due to broken insulation. Repair damaged boundary wire insulation
with connectors.
The cutting area is larger than the
allowable cutting area for Landroid
®
.
Contact service agent.
Landroid
®
wheels skid or
damage lawn.
Foreign obstacles, such as twigs
and branches may be lodged under
Landroid
®
.
Remove foreign objects from underside of
Landroid
®
.
The lawn is too wet. Wait until lawn has dried.
Landroid
®
exits the boundary
wire due to high speed when
going down a hill.
The Boundary Wire is placed on a
slope steeper than 17% (10°).
Reposition the Boundary Wire away from
slopes that are steeper than 17% (10°).
Please refer installation manual for details.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.