background image

Owner’s Manual of Lawn Mowing Robot  EN

12

6.   Boundary Wire Basics

6.1 Pegging the Boundary Wire

Use the Boundary Wire Distance Gauge (20) to set the correct 
distance between the wire and the border of your lawn (more than 
26cm*). 
* This is the recommended distance. The provided distance gauge 
ensures proper installation.
If your neighbor also uses a Landroid

®

, keep a spacing of at least 1 

metres  between your Boundary Wire and your neighbors.

The Boundary Wire must outline the intended mowing 

area exactly. 

Your Landroid

®

 will become confused by extra bends 

or coils of Boundary Wire that are not part of its mowing area (See 
Fig. H). If there is excess Boundary Wire after the mowing area has 
been outlined, then cut it off and store this additional wire in a separate location. It is important to leave the necessary 
length where it connects to the Charging Base so it can be connected and still remain buried.

6.2  Burying the Boundary Wire

If you are planning to bury the Boundary Wire, it is recommended to first peg it down. This allows you to easily change the layout 

if necessary before burying the wire. When the boundary wire installation is complete, have Landroid

®

 follow and check the path 

by pressing   and 

 . This will allow Landroid

®

 to adjust to its new environment. 

While observing Landroid

®

 you can easily make alterations to the boundary wire to ensure the Landroid

®

's trouble-free tracking 

when locating the charging station. Confirm that Landroid

®

 docks in the charging station successfully, and bury the wire if desired.

6.3   Joining the boundary wire

If you want to extend and splice the boundary wire, use a connector. 

The connector is waterproof and provides optimal connection.

Insert both wire ends in any two of the three holes of the connector. 

Insert the wires fully until both wire ends are visible on the other side 

of the connector. (See Fig. I) Press the connector together by using a 

pair of pliers. (See Fig. J1, J2)

WARNING!

 It is not recommended to simply splice the 

boundary wire with insulating tape or use a screw terminal 

block for connection. A broken circuit may occur after a period of time 

as soil moisture can oxidize the wire.

7.   Software update

 The  software can be updated when new versions become available. The latest software can be downloaded from our 
website  www.worxlandroid.com. 
Update via USB. See below for download and installation instructions:

H

I

J1

J2

Содержание S Basic LANDROID





















Отзывы: