Lawn Mowing Robot
EN
8
3. Control panel
Start
1) After the boundary wire installation, you can start using the Landroid
®
(Please refer to Installation guide for boundary
wire installation ).
2) Turn the main switch (8) to “I”(on ).
3) Press , then press
to start mowing.
4) Press and
to make Landroid
®
go to the charging base.
Landroid
®
will work continuously until reaching low battery power level and then it will return to the charging base. Once
charging is complete, Landroid
®
will automatically resume mowing or it will stay in the charging base according to mowing
schedule.
4. Intended Use
The garden product is intended for domestic lawn mowing. It is designed to mow often, maintaining a healthier and better
looking lawn than ever before. Depending on the size of your lawn, the Landroid
®
may be programmed to operate at any
time or frequency with no restrictions (Only for specific model, please check Technical Data & Declaration of Conformity).
Battery indication light
Display battery/machine
status
START
Start mowing
HOME
Send Landroid
®
to its
charging base during
operation and activates
charging
OK
Confirm any setting/Enter
Wi-Fi connection mode
STOP
To stop Landroid
®
during
operation
Error indication light
Display error messages
