Lawn Mowing Robot
EN
17
1. Gently turn your Landroid
®
upside down.
2. Remove the screws on the battery cover. Remove the battery cover. (See Fig. Q1)
3. Lift out the old battery carefully. Press the latch (a) and release the connectors. (See Fig. Q2)
NOTE:
Do not pull by the cables. Hold the connectors and release the latch (a).
4. Connect a new original battery by attaching the connectors together until it clicks into position. (See Fig. Q3, Q4)
5. Fit the battery as shown. (See Fig. Q5) Place the cover back in its position and firmly fit the screws.
10. Function Messages
The battery indication light on the interface of Landroid
®
indicates the following status:
Battery indication light
Status
Green light on
Sufficient power for mowing
Red light on
Low power, need to recharge
Green light flashing
Charging
Green light breathing flashing
Standby, waiting for next working schedule.
Red light flashing
Battery too hot. Wait until the battery cools down.
11. Security
If Landroid
®
is connected to your smartphone (Only for specific model, please check Technical Data & Declaration of
Conformity), you can lock it on your smartphone. This prevents unauthorised people from being able to use it.
Q3
Q4
Q5
