15
When the levers are centered in the T-slot, the drive system is in the neutral position. With levers
moved out in the T-slot, the drive system is in the
parking brake position. See Figure 4.
FIG 4
PARKING BRAKE POSITION
By moving both levers an equal amount forward or back from the neutral position, the machine
can be moved forward or backward in a straight line.
Movement of
the left lever forward
will cause the
left drive wheel
to rotate in a forward
direction. Movement of the
right lever forward
will cause the
right drive wheel
to rotate in a
forward direction. To stop forward travel, pull the lever back to the neutral position.
To
turn left
while moving forward, move the
left lever
back toward neutral to slow the left drive
wheel. To
turn right
while moving forward, move the
right lever
back toward neutral to slow the
right drive wheel.
To make a
zero turn
to the
left
, pull the left lever back beyond neutral while holding the right
lever slightly ahead of neutral.
To make a
zero turn
to the
right
, pull the right lever back beyond neutral while holding the left
lever slightly ahead of neutral.
Pulling the
levers back
from the neutral position will cause the respective drive wheels to rotate in
a reverse direction (when tension can be felt when moving into reverse from neutral).
To turn to the left while backing, move the left lever forward toward neutral. To turn to the right
while backing, move the right lever forward toward neutral.
POTENTIAL HAZARD
· Machine can spin very rapidly by positioning one lever too much ahead of the other.
WHAT CAN HAPPEN
· Operator may lose control of the machine, which may cause damage to the machine or injury.
HOW TO AVOID THE HAZARD
· Use caution when making turns.
· Slow the machine down before making sharp turns.
Содержание WYRZ50
