Worldlawn WYRZ50, Руководство оператора

Страница: 15 / 40

10

Operator must be in the seat when PTO is engaged or one of the motion control levers are moved
outward; or the engine will stop.
2.6 OPERATOR CONTROLS
2.6.1 Steering and Motion Control:

Separate levers on each side of the console, control speed and direction of travel of the respective
drive wheels.

Steering is controlled by varying the position of the levers relative to each other.

Moving motion control levers outward (in slots) locks the drive system in neutral.
2.6.2 PTO Switch: Engine electric clutch (to drive belt) which engages mower blades.
2.6.3 Height adjustment of mower deck: Set cutting height to desired position.
2.7 SEAT
2.7.1 Type: Standard seat: high back, foam padded (internal spring suspension).
2.7.2 Seat Safety Switch: Incorporated into the Safety Interlock System.
2.8 HYDROSTATIC GROUND DRIVE SYSTEM
2.8.1 Hydraulic System Specification
Hydrostatic Transaxle Hydro Gear EZT
Speed 11.5 km/hr forward
5.5 km/hr reverse
2.8.2 When the engine is not running, move left and right drive wheel discharge levers and open the relief
valves; then the machine can be moved.
2.9 TIRES AND WHEELS
Tires Size(inch) Qty (Units) Tread Ply Inflation
Drive Tires 18
×
9.5-8 2 Turf 2
12psi
（
82.8kPa
）
Caster Tires 11
×
4.0-5 2 Smooth 4
25psi
（
172.5kPa
）
2.10 CUTTING DECK
2.10.1 Cutting Width
：

Width
：
61.5 "
（
1561mm
）

Width
（
without discharge chute
）：
52.4"
（
1330 mm
）
2.10.2 Discharge: Side
2.10.3 Blade Size:

Blade
：
17.3" (440mm), assembled with 3 blades on each machine.
2.10.4 Blade Spindles: Solid steel spindles with 25mm bearings.
2.10.5 Deck Drive: Electric clutch mounted on vertical engine shaft. Blades are driven by one “B” Section belt
(w/self-tensioning idler) direct from the engine.
2.10.6 Mower Deck:

Mower deck is attached to front frame.