HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:[email protected] TEL:86 571 88730848
(2)Press the “DUAL” button to start the Dual function and the LED displays “ON”.
(3)Press EDIT button and then “Dual” button again to close the dual function and the LED will display “OFF”.
3.1.2 SPLIT
Press EDIT button to enter keyboard multi-function mode. Press the Keyboard Split ON/OFF function button to start the
SPLIT function. When Split is ON, the LED displays the ’SPLIT_ON’., the keyboard is split to right section and left section
by the split point, with each section use it’s own channel. The voice /channel of both channels is adjustable. The voice
and channel of right section can be adjusted currently(Split is ON),Dual and Split cannot be used at the same time. When
Split is ON, Dual is OFF. The operation steps and LED displays the following:
(1) Press EDIT button to enter keyboard multi-function mode.
(2)Press the “SPLIT” button start the SPLIT function and the LED displays “ON”.
(3) Press the EDIT and “SPLIT” button twice to close the split function and the LED will display “OFF”.
SPLIT POINT
Default Split Point is the central C (MIDI No. 60). User can choose the Split Point. Press EDIT button to enter keyboard
multi-function mode. Press the Keyboard Split ON/OFF function button twice to start the SPLIT POINT function.
Press the key that needs to be the new Split Point, LED displays the current split point value, meaning this key is set to
be the new Split Point. The operation steps and LED displays the following:
(1) Press EDIT button to enter keyboard multi-function mode.
(2)Press “SPLIT” button start the SPLIT function and the LED displays “ON”.
(3) Press the EDIT and “SPLIT” button again to start the split point function and the LED will display the current split point value.
(4) Press the EDIT and “SPLIT” button once more to close the split point function and the LED will display “OFF”.
3.2 Other controls
3.2.1 MUTE
Press EDIT button to enter keyboard multi-function mode. Press the Mute function button to start the Mute function.
When MUTE function is ON, The LED shows ‘ON’,no MIDI info will be sent. The operation steps and LED displays the
following:
(1) Press EDIT button to enter keyboard multi-function mode.
(2)Press the “MUTE” button to start the MUTE function and the LED displays “ON”.
(3)Press the “MUTE” button again to close the mute function and the LED will display “OFF”.
3.2.2 CONTROL ASSIGN
CONTROL ASSIGN mode ON/OFF function button. When ASSIGN mode is ON, The LED shows ‘CHO’,
default as assigning the controller number. that is assignable. Operate the controller to be assigned
