HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:[email protected] TEL:86 571 88730848
(2)Press the “Bank L/M” button and the LED displays the current voice bank number.
(3) Rotate the Value Dial to adjust the keyboard Bank L/M voice. The initial setting is 00, adjusting scale is 00
～
127.
(4) Press Enter button to confirm and the LED will display “Done”. It will be saved and displayed for the current voice number after resetting.
2.5 MIDI Controller Messages
There are 135 MIDI controller messages that are used for controlling the MIDI-adjustable parameters in your software or
on your external MIDI gear(0 to127 is the standard MIDI control parameter,128 to 134 is the special MIDI control
parameter). Examples of these controllable parameters include volume, pan, expression, reverb, chorus and portamento.
Each of the controls on your Blue Whale keyboard is able to send any of the 128 standard MIDI controller messages to
control such parameters. Please note that in order for these effects to work, the MIDI device you are sending to must be
able to receive these messages. A full list of these control messages is given in Appendix C.
For example, you may want to set the Modulation touch strip to control the reverb amount. This is done by assigning
controller 91 to the Modulation touch strip.
Examples of other popular effects are listed in the table below. (Please consult Appendix C for the full list.)
Effect
Control
Modulation
1
Volume
7
Pan
10
Expression
11
Reverb depth
91
Chorus depth
93
There are many different types of virtual instruments available and most of these respond to MIDI controller messages,
allowing you to control a variety of parameters from your Blue Whale keyboard. Please review the manual that came with
your software or external gear to see what these controller numbers are.
2.5.1 Programming the Controls on Your Blue Whale
When programming a physical controller on your Blue Whale, the controller that was last used will be the first one
selected for programming. To select a different physical controller for programming, the method is: Move the physical
controller you wish to program, and press the assignable button.
When in assign, the LED displays “CH0”.
2.5.2 ASSIGNABLE DIAL
There’re 8 dials(4 for Blue whale25) that can be assigned channel and controller No. independently. First press the
“Assign” button. Then operate the dial for selection, and the LED shows the controller number.
Input the No. with Value Dial when the dial is selected. The numbers are the controllers. You also need to use the ‘Enter’
button to confirm the data.
For example: if you want to assign R1 to volume control 7, operation steps are shown as
below:
