Worldcast Systems RELIO Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 61

Worldcast Systems RELIO Скачать руководство пользователя страница 45

Relio 4.2.x User Manual – 07/2015

Page 45

Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –

[email protected] – www.worldcastsystems.com

4.

AUDIO STREAMING

If your Relio has the audio input and output connections on the rear panel, it supports audio streaming.

Audio input

Connect an audio source to the Relio – 3.5mm (1/8”) sub-mini unbalanced stereo phone jack. Audio streaming is
available through MasterView or the embedded Voice/DTMF interface.

To stream audio through MasterView, connect to the Relio and click the Audio Streaming button on the
right side of the toolbar. This will stream audio to the local PC speakers, using the High bit rate setting
(see section 4.16 for setting bit rates)

To stream the audio source over the phone, log in to the Relio’s Voice DTMF interface (see the Phone Alerts
chapter in the ScriptEasy manual for more information on configuring and using the DTMF interface) and enter the
command

950

using the touch tone keys.

To stop streaming, send any other DTMF command.

«
...
43
44
45
46
47
...
»

Содержание RELIO






























































Отзывы:

Нет отзывов