Relio 4.2.x User Manual – 07/2015
Page 32
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
[email protected] – www.worldcastsystems.com
Local port redirection:
The port redirection allows the user to set values for the IP Ports used by various functions of the Relio. This is
useful when the default ports are not desirable or available (for ex: forbidden by the ISP, filtered by a firewall...).
The redirection configuration is done in the « local port redirection ».
For each port used in the RELIO, select the interface of the port (for example PPP in the case of a modem
connection) and the new port to use in the “duplicate to” field.
NOTE: In this section of the software, eth0 refers to the primary Ethernet port (enet 2 on the early rear panels).
Each redirection line can be activated or disabled independently.
Once the configuration is done, lock it in by clicking on “update”.
Then click the “enable new configuration” button at the top of the page to turn on the new redirections.
The redirection does not deactivate or turn off the default ports. It only ‘clones’ or duplicates their functions
on the ports designated. External methods must be used to block any undesired ports from the network.
Remember to click the ‘Update’ button in each section to lock in any changes.