Relio 4.2.x User Manual – 07/2015
Page 21
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
[email protected] – www.worldcastsystems.com
3.11.
Date/Time
If you are going to use the Relio with an SNTP connection configure the NTP settings, then the time zone. The
rest of the parameters will adjust themselves automatically.
If setting time and date manually, set the time zone first – changing the time zone affects the time and date
displayed in those boxes.
Any changes on this page will cause a restart of the system software – time and date changes affect many
areas of the system, a restart is necessary with any change.
Set system date
:
The user may update both date (year/month/day) and time (hour/minute/second)
Set system time zone: to
update the geographical time zone
The user selects the geographical zone from the list. Important to have this set correctly when using an NTP
server.
Network Time Protocol
: NTP update (Network Time Protocol)
The user can enter a time server address to update the equipment’s internal clock automatically. Make
sure this address can be reached by the unit; specifically, the gateway must be properly set. Specify
whether it should be synchronized continuously or periodically. For periodic synchronization, indicate what
time the daily synchronization should occur (between 0 and 23).
Remember to click the ‘Update’ button in each section to lock in any changes.