10
REPLACING THE ROTORS
The rotors may become damaged during a
collision. The drone comes with 4 spare rotors.
Please replace damaged rotors immediately.
The drone comes with 2 A rotors and 2 B rotors.
The A and B rotors must be installed on specific
locations on the drone for it to fly properly. Check
the bottom of each rotor to see if it’s labeled
either A or B. Use the illustration to the right to
install them in the correct location.
FRONT
BACK
A
B
B
A
The rotor is held by friction so tools are
not needed. Hold the drone and rotor
firmly with each hand and remove the
damaged rotor by pulling upward.
Once removed find the matching new
rotor to replace it with. Match the letter
“A” or “B” on the underside of the
rotors.
Place the correct A or B rotor on top of
the peg. Hold the drone and rotor
firmly with each hand and push the
rotor onto the motors peg.
Repeat the process for any other
rotors that need replacing.
POST FLIGHT
After you are done flying the drone make sure the battery pack is disconnected and the transmitter
power is turned off. If you are not going to use the drone for a long period of time, please remove the AA
batteries from the transmitter to prevent them from draining or leaking.
