World Cat 255 DUAL CONSOLE 2015, Руководство пользователя

Страница: 24 / 92

2015 World Cat 255DC Owners Manual
Page 5-23
5.9 P
OWER
S
TEERING
S
YSTEM
- B
LEEDING
I
NSTRUCTIONS
(O
PTIONAL
255DC)
5HIHUHQFHWKHEOHHGLQJLQVWUXFWLRQVSURYLGHGE\WKH7HOHIOH[ŒRZQHU¶VPDQXDOZKLFKLVLQFOXGHGLQ\RXU³2ZQHU¶V
3RUWIROLR´8VHWKHPLQFRQMXQFWLRQZLWKWKHLQVWUXFWLRQVDQGGLDJUDPEHORZWREOHHGWKHVWHHULQJV\VWHP7KLVVKRXOG
be done annually.
NOTICE
If possible, have your dealer or trained marine technician perform routine maintenance or repairs on your steering
system. Replace faulty parts immediately.
5.9.1 Step 1
x :LWKWKH3RZHU3XUJHWXUQHG³2))´DWWDFKKHOPILWWLQJDQG
leads.
x
Attach one of the leads to the bleader valve on the Power
Assist Pump.
x 2SHQWKHEOHDGHUYDOYHXVLQJD´ZUHQFK
x 7XUQWKH3RZHU3XUJHXQLW³21´
x Watch for air bubbles in the clear hydraulic lines. Once no
more bubbles can be seen and there is a steady flow of
hydraulic fluid through the lines, allow the Power Purge to
run for an additional 60 seconds.
x 7KHKHOPLVQRZIXOORIIOXLG7XUQ3RZHU3XUJH³2))´
Close bleeder valve and disconnect line from the Power
Assist Pump. Place dust cap back on bleeder valve.
5.9.2 Step 2
x
Attach the four lines to each of the bleeder valves on the
steering cylinders.
x
Open each of the four bleeder valves.
x 7XUQ3RZHU3XUJH³21´
x
Turn the steering wheel slowly 20 times clockwise, then
slowly 20 times counter-clockwise.
5.9.3 Step 3
x
With Power Purge turned
³21´PRYHERWKHQJLQHVWKURXJKWKHLUIXOOUDQJHRIPRWLRQ7KLVZLOOKHOSUHPRYH
any air bubbles still trapped inside the cylinders).
x
As a final precautionary step, pull on the engines firmly at the ends of their normal range of motion (This will
also help to insure all of the air is out of the cylinders).
5.9.4 Step 4
x 7XUQWKHLJQLWLRQNH\IRUWKHSRUWHQJLQH³21´7KLVZLOOWXUQWKH3RZHU$VVLVW3XPS³21´
x 5HSHDW³6WHS´
x ,IQRPRUHEXEEOHVFDQEHVHHQWKHQWKHEOHHGLQJLVFRPSOHWH7XUQWKH3RZHU3XUJH³2))´&ORVHDOOIRXU
bleeder valves. Disconnect the four lines from the cylinders and both lines from the helm. Remove the helm
fitting and replace it with vent cap.
x
If bubbles are still present in lines, then bleeding was not successful. Repeat entire process.