Workzone Q1W-SPO5-2200A, Руководство пользователя

Страница: 23 / 31

Storage
23
Cleaning the dirt filter
The washer is equipped with a dirt filter to protect the pump. If the
dirt filter is not kept clean, the flow of water to the washer will be
restricted and the pump could be damaged.
1. Check the dirt filter after each use.
2. Screw off the adapter on the screw connection for the water
inlet hose 7 and take out the dirt filter.
3. Rinse out the dirt filter until it is free of dirt and deposits.
4. Insert the dirt filter again and screw the adapter on the screw
connection for the water inlet hose tightly.
Cleaning the high-pressure nozzle
1. Remove the cleaning pin 4 from the rear side of the washer.
2. Use the cleaning pin to clean the high-pressure nozzles of the
cleaning attachments.
3. Re-insert the cleaning pin in the rear of the washer.
Storage
NOTICE!
Risk of damage!
There is always some leftover water in the washer and the pump
that could result in damage to the washer.
− Do not store the washer at temperatures below the freezing
point, as this may result in frost damage.
− If you take the washer out of commission for a prolonged
period of time, empty the cleaner container and let the water
drain out of the high-pressure hose.
− Store the washer upright in a dry, well ventilated location
protected from access by children.
− Wind the high-pressure hose 2 using the hand crank 3
anticlockwise onto the hose reel.