Workzone Q1W-SPO5-2200A, Руководство пользователя

Страница: 18 / 31

Using the cleaning attachments
18
2. Fill the suction hose with water and allow all of the entrapped air
to escape.
3. Connect the suction hose to the washer. Remove all attachments.
4. Switch on the washer and press the trigger 13 until the washer
discharges a steady stream of water. If this is not achieved within
2 to 3 minutes, switch the washer off and check the suction hose
for entrapped air.
5. Switch off the washer and connect the desired attachment.
6. Operate the washer as usual.
In addition, please refer to the user manual of the relevant
accessory part.
Using the cleaning attachments
Fitting the spray lance
WARNING!
Risk of injury!
The high-pressure jet is very hard and can inflict injury.
− Start using the washer by working at a substantial distance
and reduce this as needed.
The spray lance
16
is equipped with a quick lock
15
to assist in
changing the cleaning attachments.
1. Insert the spray lance into the spray gun 11 in such a way that
the end of the quick lock points away from the spray gun.
2. To fix the spray lance, push it slightly downwards and turn it
clockwise at the same time.
Removing the spray lance
1. Stop the washer and move the ON/OFF switch 5 to OFF .
2. Push the trigger 13 until the pressure in the washer has been
released.