Workzone Q1W-SPO5-2200A, Руководство пользователя

Страница: 15 / 31

First use
15
WARNING!
Risk of injury!
The washer could be inadvertently activated and cause injury.
− Ensure that the washer is disconnected from the mains before
you assemble the washer.
Assembling the washer
WARNING!
Health hazard!
The washer must not be directly connected to the drinking water
network because the return flow of water poses a risk to the
drinking water.
− Use a water backflow preventer or an inlet hose set approved
in accordance with IEC 61770.
− Cleaning car motors and other objects contaminated by oil and
various lubricants is permissible only on such areas where the
waste water is diverted by an oil separator.
− Water that has flowed through the backflow preventer is
considered unfit for drinking.
1. Insert the plug connection of the high-pressure hose 2 in the
connection 12 on the handle of the spray gun 11 .
2. Insert any given cleaning nozzle onto the spray gun. See section
“Using the cleaning attachments”.
3. Connect a water inlet hose with a quick-lock coupling
(not included in the scope of supply) with the screw connection
for the water inlet hose 7 . The water temperature may amount
to no more than 40 °C.
4. Insert the mains plug into a properly installed socket with an
earthing contact and alternating voltage in accordance with the
washer’s rating plate.