Workzone Q1W-SPO5-2200A, Руководство пользователя

Страница: 10 / 31

Safety
10
the earth exceeds 30 mA for 30 ms, or that it be equipped with
an earth tester.
− Connect the washer only if the mains voltage of the socket
corresponds to the rating plate specification.
− Connect the washer only to an easily accessible socket to allow
the washer to be disconnected from the mains quickly in the
event of a fault.
− Do not operate the washer if it is visibly damaged or if the
mains cord or mains plug is defective.
− If the supply cord of the washer is damaged, to avoid risks it
must be replaced by the manufacturer or its after sales support
or by a person with similar qualifications.
− Do not open the housing; instead, have a qualified
professional carry out the repairs. Contact a qualified
workshop for this. Liability and warranty claims are waived
in the event of repairs performed by the user, improper
connection of the device or incorrect operation.
− Only parts that comply with the original device information
may be used for repairs. This washer contains electrical and
mechanical parts which are essential for providing protection
against sources of danger.
− Do not operate the washer with an external timer or separate
telecontrol system.
− Do not immerse the washer or the mains cord or mains plug in
water or other liquids.
− Never touch the mains plug with damp hands.
− Never pull the mains plug out of the socket by the mains cord;
instead, always do so by taking hold of the mains plug.
− Never use the mains cord as a carrying handle.
− Keep the washer, mains plug and mains cord away from open
flames and hot surfaces.
− Lay the mains cord so that it does not pose a tripping hazard.
− Do not kink the mains cord and do not lay it over sharp edges.