AFTER SALES SUPPORT
(toll free)
220W 3-in-1 Multi Purpose Sander
e-mail: [email protected]
1800 909 909
MODEL No.: S1B-DW01-220W • 09/2018 • 61865
11
Specific Safety Instructions for Sanders
• Remove the plug from the socket before carrying out any adjustment,
servicing or maintenance.
• Fully unwind cable drum extensions to avoid potential overheating.
• When an extension cable is required, you must ensure it has the right
ampere rating for your power tool and is in a safe electrical condition.
• Ensure your mains supply voltage is the same as your tool rating plate
voltage.
• Your tool is double insulated for additional protection against a possible
electrical insulation failure within the tool.
• Always check walls, floors and ceilings to avoid hidden power cables and
pipes.
• After long working periods external metal parts and accessories could
be hot.
• Do not force the sander; let the tool do the work at a reasonable speed.
Overloading will occur if too much pressure is applied and the motor
slows resulting in inefficient sanding and possible damage to the sander
motor.
• When sanding wood, always connect the dust extraction filter.
• Take special care to guard against harmful and toxic dusts when sanding
lead-based painted surfaces, woods and metals, including the following:
- All persons entering the work area must wear a mask specially designed
for protection against toxic dust and fumes such as those arising from
the sanding of lead paint.
- Children and pregnant women must not enter the work area.
- Do not eat, drink or smoke in the work area.
• Before using the sander with metal always remove the extraction filter
from the outlet as sparks may ignite the dust or the internal bag.
• Do not continue to use worn, torn or heavily clogged sanding sheets.
• Do not touch the moving sanding sheet.
• Ensure that you have removed foreign objects such as nails and screws
from the work before commencing sanding.
• Rags, cloths, cord, string and the like should never be left around the
work area.
Appliance-specific safety instructions
• Secure the workpiece. A workpiece securely held by a clamping device is
much safer than one held in your hand.
• Do not rest your hands next to or in front of the appliance and the area
being worked as there is a risk of injury if you slip.
• In case of danger, remove the plug from the socket immediately.
• Always route the power cord towards the rear, away from the appliance.
RISK OF FIRE DUE TO FLYING SPARKS!
If you sand metal, sparks will be produced. Ensure that nobody can
be put at risk and that no combustible materials are located in the
immediate vicinity of where you are working.
WARNING! TOXIC VAPOURS!
• Working with the tool can produce harmful/ toxic dusts that represent a
health hazard for the person operating the appliance and for any other
people in the area.
WARNING! DANGER FROM DUST!
When working for extended periods of time on wood and, in particular,
materials that produce dust that is hazardous to health, connect the
appliance to an appropriate external dust extraction appliance.
Wear safety goggles and a protective dust mask!
• Provide suffcient ventilation when working on plastics, paints,
lacquers, etc.
• Do not soak the materials or the area to be processed with liquids
containing solvents.
• Never work on moistened materials or damp surfaces.
• Avoid sanding lead paint or other harmful materials.
• Materials containing asbestos may NOT be processed. Asbestos is a
known carcinogen.
• Avoid contact with the sanding sheet while the appliance is running!
• Do not use the appliance without a sanding sheet fitted.
• Never use the appliance for other purposes and only original parts/
accessories. Using attachments or accessory tools other than those
recommended in the operating instructions can lead to a risk of injury.
• Always allow the appliance to come to a complete standstill before
putting it down.
• The appliance must always be kept clean, dry and free from oil or grease.
8
9
MODEL No.: S1B-DW01-220W PRODUCT No.: 61865
MODEL No.: S1B-DW01-220W PRODUCT No.: 61865
