220W 3-in-1 Multi Purpose Sander
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909
MODEL No.: S1B-DW01-220W • 09/2018 • 61865
(toll free)
AFTER SALES SUPPORT
(toll free)
220W 3-in-1 Multi Purpose Sander
e-mail: [email protected]
1800 909 909
MODEL No.: S1B-DW01-220W • 09/2018 • 61865
24
25
Specifications
Mains Voltage:
230-240V ~ 50Hz
Rated Power:
220W
No Load Variable speed:
7000-12000 min-
1
+/- 5%
Oscillation Speed:
14000-24000 min-
1
+/- 5%
Random Orbit base pad size:
Φ125 mm
Rectangle sander base pad size: 92 x 182 mm
Triangle base pad size:
101x146 mm
Weight (NW):
1.64 kg
Product Dimensions:
290 x 95 x 170 mm
This product complies with the following standards:
Safety:
AS/NZS 62841.1: 2015+A1:2016
AS/NZS 62841.2.4: 2015+A1:2016
EMC:
EN 55014-1:2006/A1:2009/A2:2011
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Technical Specifications
Troubleshooting
Sparking visible through the housing air vents on
the sander:
- A small amount of sparking may be visible through the housing vents.
This is normal and does not indicate a problem.
Excessive sparking visible through the housing air vents
and/or the sander failing to operate:
- Ensure the product is plugged in at mains power, and the on/off switch is
turned to the ON position as indicated by an “I”.
- May indicate the carbon brushes have worn out and need to be replaced.
Carbon brushes should only be replaced by a qualified electrician or
service agent.
- Excessive sparking can also occur on a new tool where bedding of the
brushes is occurring and will decrease as the brushes wear in.
Sander is performing poorly:
- Ensure the sander is fitted with the most suitable base for your purpose.
- Ensure the sander is fitted with the most suitable sandpaper type and grit
for your purpose.
- Excessive downward pressure on the sander will also decrease the sanding
performance. Only slight downward pressure is required, thus ensuring
maximum movement of the sanding pad.
- Ensure the sandpaper being used has the same hole configuration as the
base to allow for efficient dust removal and air flow.
- Remove and clean the dust collection box (refer to maintenance section).
