Workzone 1544062 страница 4 Скачать руководство пользователя

Страница: 4 / 32

General Information

and Safety Instructions

IMportANt: When using the equipment, a few safety precautions

must be observed to avoid injuries and damage. Please read the

complete operating instructions and safety regulations with due care.

Keep this manual in a safe place, so that the information is available at

all times. If you give the equipment to any other person hand over these

operating instructions and safety regulations as well. We cannot accept

any liability for damage or accidents which arise due to a failure to follow

these instructions and the safety instructions.

Important information

Please read the operating instructions carefully and observe the

information provided. It is important to consult these instructions

in order to acquaint yourself with the equipment, its proper use and

safety information.

IMportANt: Only use this appliance for the purpose for which it is

designed and as described in these instructions: Manual arc welding

with coated electrodes. Handling this system incorrectly may be

hazardous for persons, animals and property. The user of this system

is responsible for their own safety and for the safety of others.

Read these operating instructions and follow all the regulations.

Electrical safety

•

Repairs and/or maintenance work may only be carried out by

qualified personnel.

•

Use only the power cables and welding cables supplied.

•

Ensure that the appliance is looked after properly.

Ire

WZAW 150

0151 649 1500

1890 946 244

www.einhell.co.uk

After SAleS Support

Содержание 1544062

































Результаты поиска

Содержание 1544062

Отзывы:

Похожие инструкции для 1544062

Бренды по названию

Популярные бренды

Workzone 1544062, Руководство по эксплуатации

Результаты поиска

Содержание 1544062

Отзывы:

Похожие инструкции для 1544062

Бренды по названию

Популярные бренды