Workzone 1544062, Руководство по эксплуатации

Страница: 14 / 32

Welding preparations
Connect the earth terminal (-) (2) direct to the part to be welded or to the
support on which the part is resting. Ensure that the earth terminal (-) is
in direct contact with the part to be welded. You should therefore avoid
coated surfaces and/or insulated materials. The electrode holder cable
has a special clamp at one end, which is used to secure the electrode.
The face shield must be used at all times for welding. It protects your eyes
from the radiation emitted by the arc and nevertheless enables you to
watch the welding process.
Assembling the face shield (Fig. 3-9)
• Place the welding glass (l) and the transparent safety glass (m) over it in the
frame for the safety glass (k) (Fig. 3).
• Press the safety glass retaining pins (q) into the holes in face shield frame (s)
from the outside (Fig. 4).
• Place the frame for the safety glass (k) with the welding glass (l) and
transparent safety glass (m) from the inside into the recess in the welding
frame (s), press the safety glass retaining bushes (n) onto the safety glass
retaining pins (q) until they engage to secure the frame for the safety glass
(k). The transparent safety glass (m) must be on the outside (Fig. 5).
• Bend the top of the face shield frame (s) inwards (Fig. 6/1) and fold down the
top corners (Fig. 6/2). Now bend the outer sides of the face shield frame (s)
inwards (Fig. 6/3) and connect them by pressing the top corners and outer
sides together. When the retaining pins engage, you should be able to hear
2 clear clicks on each side (Fig. 6/4).
• When the top corners of the face shield are connected as shown in Figure 7,
place the screws for the handle (p) from the outside through the three holes
in the face shield (Fig. 8).
• Turn over the face shield and place the handle (r) over the threads on the
three screws for the handle (p). Secure the handle (r) to the face shield using
the three nuts for the handle (o) (Fig. 9).
Getting Started
4
15 14