11. OPERATOR MODE
Celsius, degrees Fahrenheit or Kelvin.
ROIs displayed on the graph are selected also in the administrator mode.
The graph should provide additional information about the measurement progress.
Figure 11.6: Measurement graph.
Digital outputs
Digital outputs images show the current state of the signal ‐ enabled or disabled.
In case of transparent output, this particular output it is not used because of the measurement settings.
Digital output signals are represented as D0 ‐ D6.
Figure 11.7: Digital outputs.
11.2 Work‐flow
The operator has just limited number of actions to do. Please, follow these steps to start and finish the measurement
session:
1. Log in the operator mode.
2. Wait few seconds for the settings to be loaded.
3. If ready, start the measurement by clicking on the
Start
button.
4. When the session is finished, stop the measurement by clicking on the
Stop
button.
E‐mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Version 210224 EN, 24
th
Feb, 2021
All pictures are only for illustration.
Real values may vary.
38
