ENGLISH
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
When using electric tools, machines or equipment, basic safety
shock and personal injury.
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL
1. WARNING
Read and understand all instructions.
Failure to follow all instructions listed
below may result in electric shock, fire and/or serious personal injury.
2. WORK AREA
a.
Keep your work area clean and well lit.
Cluttered benches and dark
areas invite accidents.
b.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
Power tools create sparks,
which may ignite the dust or fumes.
c.
Keep bystanders, children and visitors away while operating a power
tool.
Distractions can cause you to lose control.
3. ELECTRICAL SAFETY
a.
Double insulated tools are equipped with a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install a polarized outlet.
Do not change the plug in any way.
Double insulation eliminates the need
for a three-wire grounded power cord and grounded power supply system.
b.
Avoid body contact with grounded surfaces, such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if
your body is grounded.
c.
Do not expose power tools to rain or wet conditions.
Water entering a
power tool will increase the risk of electric shock.
d.
Handle cord carefully.
Never use the cord to carry the tools or pull the
plug from an outlet. Keep cord away from heat, oil, sharp edges and
moving parts. Replace damaged cords immediately.
Damaged cords
increase the risk of electric shock.
e.
When operating a power tool outside, use an outdoor extension cord
marked “W-A”or “W”.
These cords are rated for outdoor use and reduce
the risk of electric shock.
4. PERSONAL SAFETY
a.
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use tools while tired or under the
influence of drugs, alcohol or medication.
A moment of inattention while
operating power tools may result in serious personal injury.
b.
Dress properly. Do not wear loose clothing or jewelry. Contain long
hair. Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught in moving parts.
TABLE OF CONTENTS
p.13
SCHEMATIC DIAGRAM
PARTS LIST
p.14
S
N
O
I
T
C
U
R
T
S
N
I
Y
T
E
F
A
S
T
N
A
T
R
O
P
M
I
p.15
p.17
SAFETY PRECAUTIONS FOR CIRCULAR SAWS
p.17
SPECIFICATIONS
p.18
OVERVIEW OF COMPONENTS
p.18
ASSEMBLY
p.21
OPERATING PROCEDURES
p.23
MAINTENANCE
p.23
WARRANTY
15
