4 of 12
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Attach Side Bars Bumpers to Underside of Framesets
Flip the Framesets (C & CC) "right side up"
to add Side Bars (D) & Bumpers (X & Y) to
the side of the frameset that will come
into contact with the underside of the
Worksurface.
Attach Side Bars (D) to Frame Assembly with
¼-20 × ⅝" Flat Head Phillips Cap Screws (V).
Attach the ten Round Bumpers (X) at mount
locations on the rear of the Frameset as
shown. Apply the two Square Bumper (Y) at
both of the Joining Bracket locations just to
the side of the center hole.
X
X
Y
Y
To avoid stripping the threads, always insert and make
the first few turns of the screw BY HAND with the provided
Allen wrench, ensuring it is in straight.
C
a
a
b
b
V
V
D
D
2
V
1/4-20 × 5/8" Flat Head
Socket Cap Screw
Hardware at actual size
X
Round Bumpers
Hardware at actual size
Y
Square Bumpers
Hardware at actual size
CC
Framesets shown flipped over "right side up"
Joining Bracket
