Workrite Ergonomics | 800.959.9675 www.workriteergo.com
9 of 18
Install Leg Cables, Switch Cable & Cable Loops
5.1 Connect the Leg Cable (N) to the six position connector labeled ”1” on both the Right (Control) Leg (A) and the
Left Leg (A).
5.2 Uncoil Leg Cable and wrap extra cable length around each cable spool
(Be sure to leave enough cable length to reach control box and plug in properly)
5.3 Insert the Power Cable (O) into the two position connector labeled “DC” on the Control Leg.
5.4 Insert the Control Cable into the data connector labeled “A1” on the Control Leg.
5.5 Use remaining P-Loops (M) and #8 x 5/8” Pan Head Screws(L) to neatly attach remaining loose cables to top
Hardware at actual size
L
#8 × ⅝" Pan Head Screw
Laminate Top Screw
5.2
5.3
5.3
5.5
5.4
5.4
5.1
5.1
M
Wrap extra cables clockwise
O
A
N
N
Q
5
Control Cable
Leg Cable
Power Cable
Control Leg (Right)
Companion Leg
(Left)
O
Control Cable
