14 of 18
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Parts Included
Benching Foot Kit
A
Benching Feet with Glides
Qty: 2
B
#M6 × 16 mm Flat
Head Cap Screw
Qty: 16
D
Hole Plug
Qty: 20
C
4 mm Allen Wrench
Qty: 1
Note!
Only use the #M6 × 16 mm Flat Head
Cap Screw (B) supplied with the
Benching Foot Kit to attach feet.
Flip table over
from end
11.3 Install (4) M4 x 16 mm screws into each leg and tighten securely
(16 screws total)
11.4 Install (3) Foot Glides (H) into each foot
(6 Foot Glides Total)
11.5 Using at least two persons carefully turn base assemblies upright from side end of table
Attach Bench System Feet
11.1 Align two (2) assembled workstations back to back
11.2 Place feet onto legs as shown
(It may be necessary to move
one of the bases to align property to drop foot onto legs)
Parts Included
B
#M6 × 16 mm Flat Head
Cap Screw
Hardware at actual size
11
C
B
B
B
A
A
B
H
D
D
D
D
H
Flip onto side so you do
not damage the control!
Caution! Heavy!
DO NOT TURN THE TABLE OVER FROM THE FRONT EDGE OF THE
TOP OR YOU WILL DAMAGE THE PROGRAMMABLE SWITCH
11.1
11.2
11.3
11.5
11.4
H
H
H
H
