Maintenance
3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
11
The backside of the Lumitron is equipped with two
electrical outlets. One outlet is used to power the
vacuum motor, and the other outlet is a spare. The
outlet is 6 amps maximum.
Electrical Outlets
Cleaning the Glass
Disconnect the power before servicing the Lumitron.
Use a screw driver to pry up the glass top. Carefully
pivot the glass upward and place it on a soft and clean
surface. Clean the glass with high quality cleaner, do
not use cleaning solvents or chemicals.
Replacing the Bulbs
Disconnect the power before servicing the Lumitron.
To remove the fluorescent bulbs rotate the 1/4 turn
and remove the bulb from the holder. Replace the
bulbs by inserting the pins in the bulb holder, and
then rotate the bulbs to lock in place.
Replace all of the bulbs all at the same time. This will
ensure the exposure level remains consistent across
the entire exposure surface. Place the glass back onto
the Lumitron by inserting the back of the glass into
the rear of the track and slowly lower the glass into
position.