Assembly
3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
7
Attach the opposite side splash panel in the same manner.
After installing both side splash panels, insert the translucent
back splash panel into the slots provided. Ensure the back
panel is inserted until it contacts the lip on the Wash-It sink
base. Note that the double wide Wash-It sink is supplied
with two translucent back splash panels.
Securely tighten all fasteners using a 1/2” wrench.
Install the top splash panel. The lip on the top panel faces up
and should be on the rear of the Wash-it sink as shown.
Align the bolt holes and insert three bolts on each side.
Loosely fasten the bolts until all are installed, then securely
tighten using a 1/2” wrench.
