3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
6
Loosely fasten the rest of the legs as shown.
Loosely fasten the leg braces between the two back
legs and two front legs with the smooth side facing
out using four bolts, washers, and nuts.
When all of the bolts, lock washers and nuts are in
place securely tighten using a 1/2” wrench.
Place the Wash-It sink base and leg assembly on the
floor.
Install one of the two side splash panels into the
Wash-It sink base corner. The shorter side of the
L shaped panel faces the center of the Wash-It sink.
Loosely fasten with bolts, lock washers, and nuts.
and put it into one of the corners.
Assembly
