Workhorse Products PD3009-3-1P, Руководство пользователя

Страница: 5 / 17

8 9
3730 E. SOUTHERN AVE., PHOENIX, AZ 85040 | USA 800.778.8779 | WORKHORSEPRODUCTS.COM
ASSEMBLY
STEP 2: ATTACHING THE INFEED
Locate the side of the dryer with the tablet.
Insert a hex bolt and washer into the four
holes where the Infeed Arm will connect.
Make sure the hex bolts are facing out.
Have the 4x Flanged Nuts readily available.
Lift the Infeed Arm and insert it into the four
exposed hex bolts.
While holding the Infeed Arm, hand tighten
the flanged nut to the top hex bolt FIRST
(
This relieves the weight from the top
)
Hand tighten the second flanged nut to the
bottom hex bolt.
Repeat on other side of Infeed Arm.
Using the 9/16” wrench on the top of the
bolt and the 9/16” socket wrench on the nut,
tighten all four hex bolts.
Locate the side of the dryer opposite of the
tablet.
Insert a hex bolt and washer into the four
holes where the Outfeed Arm will connect.
Make sure the hex bolts are facing out.
Have the 4x Flanged Nuts readily available.
Lift the Outfeed Arm and insert it into the
four exposed hex bolts.
While holding the Outfeed Arm, hand tighten
the flanged nut to the top hex bolt FIRST
( This relieves the weight from the top )
Hand tighten the second flanged nut to the
bottom hex bolt.
Repeat on other side of Outfeed Arm.
Using the 9/16” wrench on the top of the
bolt and the 9/16” socket wrench on the nut,
tighten all four hex bolts.
1.
2.
3.
4.
1.
2.
3.
4.
TOOLS NEEDED TOOLS NEEDED
9/16” Socket Wrench
9/16” Wrench
9/16” Socket Wrench
9/16” Wrench
PARTS NEEDED PARTS NEEDED
Infeed Arm
4x Hex Bolt (3/8-16 x 3/4”)
4x Flanged Nuts (3/8-16”)
4x Flat Washers
Outfeed Arm
4x Hex Bolt (3/8-16 x 3/4”)
4x Flanged Nuts (3/8-16”)
4x Flat Washers
•
•
•
•
•
•
•
•
•
•
•
•
ASSEMBLY
STEP 3: ATTACHING THE OUTFEED