9
on Screen
Delay me is the amount of me before the tables will spin aKer making a print stroke. Depending on situaon of prinng , if you
are flashing you may need to adjust this me higher to allow for a longer or shorter cure so machine will cycle faster
Flood me is the amount needed to allow the squeegee to flood all the way forward on the slowest squeegee. In other words, it
controls how long the tables stay down. If the squeegee is not flooding the whole design before the table rises you may need to
allow more me on the Flood mer
Print me is the amount of me needed to pull the slowest squeegee across the image area. The longer the print me, the longer
the tables stay in the up posion, this may be needed to keep a garment to a flash longer also
Print Start:
Making this selecon is for puMng your first garment on the machine or beginning producon. When hiMng print all, the first
garment will go to print head #1 and the following heads will sequenally turn on aKer every index. This will then connue on in
full producon capacity.
Print All:
Making this selecon will cause all heads to print together. Normal selecon would be if you were prinng and hit the stop
buIon to make a change, clean a screen, add ink or something to that nature. Then to start with all heads your selecon would
be Print All
Print End:
Once you have loaded your last garment at the load staon select Print End and the heads will sequenally turn off as that last
shirt makes it way around.
Press To Stop:
In any mode of prinng the normal procedure is hiMng the Press To Stop key, this will cause the printer to end the cycle. This is
not a emergency stop this is a Stop cycle.
