22
The type 1 shock has a scale engraved on the ring at the end of the shock. This ring buIs against the threaded body of the shock
where there is a dimple indicang the seMng of the shock.
The shock is very sensive to change, adjust with cauon moving is fracons between the numbers. The lower the number the
sffer the shock gets.
When the table indexes the shock should be adjusted to bring the table to a stop, boIoming out all the way without shaking. If the
shock is to sff it will not compress enough on impact causing registraon problems. The same issues can occur if the shock is set
to soK and can cause damage to the press.
Note:
The number indicated in the picture above does NOT reflect what the shock seMng is on each press. Always consult a trained
Workhorse Products technician before any adjustments are made.
