SCPRO 4A BL
MANUAL DE USUARIO
VERSION 1.0
BLUELINE DIGITAL MKII SERIES
www.workpro.es
14
Device Setup
The configuration of the device must be done through the WorkCAD3 configurator software,
which can be downloaded from our website.
After configuring the device's IP level and updating it if necessary (See WorkCAD3 Configurator
manual), proceed with its configuration.
If you click with the left mouse button on the device, the configuration interface will open where
the following parameters to be configured appear.
-
Zone: This field refers to the zone to which the device belongs, in order to receive
OSC control commands. By default, all BlueLine receivers come in zone 1.
-
Generate Ding Dong: Button for the receiver to execute a Ding Dong signal. This is
useful to be able to recognize / check the speakers connected to our receiver.
-
Channel: Stereo audio channel number that we want to extract.
-
Controller’s
offset: Field to enter an offset in the wall control (BLC 1 or WNC 1) that
controls the device. For example, if we enter "1" in this field, the minimum channel
that can be chosen in the wall control will be "1", so that if we have a reserved source
in channel "0", the user will not be able to access it.
-
Output mode:
•
Dual: Estereo audio extraction.
•
Single: Audio extraction in individual mode.
