SCPRO 4A BL
MANUAL DE USUARIO
VERSION 1.0
BLUELINE DIGITAL MKII SERIES
www.workpro.es
10
Description of the device
1.
RST. Take the device to its factory configuration
2.
LAN. Connection port to local network, RJ45.
3.
REMOTE. Port for wallmount controller connection BLC 1 (RJ 45).
4.
LOWER Terminal Block (From Left to Right )
1.
GPO. Open collector, 12Vdc max. 1A max.
2.
GND. Ground connection
3.
GPI. Pull Up resistor, 5 Vdc max
4.
GND. Ground connection
5.
OUT_L: Left output (line level) for stereo mode or positive por mono balanced.
6.
GND. Ground connection
7.
OUT_R: Right output (line level) for stereo mode or negative por mono
balanced.
8.
5.
UPPER Terminal Block (From Left to Right )
1.
SPK_1: Positive to speaker 1
2.
SPK_2: Positive to speaker 2 (Negative in Bridge mode)
3.
GND. Ground connection
4.
SPK_1: Positive to speaker 1
5.
GND. Ground connection
6.
24V DC. Positive pin for main supply
7.
GND. Ground connection
RJ45 port for LAN connection. Allows PoE power (Class 0 802.3af).
Next to the RJ45 connector you will find two LEDs indicating the status of the device:
LINK (green) Indicates that the SCPRO 4 BL is connected to the LAN
ACT (orange) Indicates that packets are being sent or received
4.2.1.
Puerto LAN
