CORDLESS PRUNING SAW
INTENDED USE
The tool - normative sabre saw - with fixed stop (shoe) is intended for cutting wood, plastic and building materials. The tool is
suitable for rough saw cuts, straight or curved cuts, and flush surface cuts. Used with the holding bracket the tool is suitable for
cutting branches. Please note the information on saw blades and instructions on sawing. Any other use or modification of the tool
is deemed improper use with serious risks. The manufacturer is not liable for damage caused by improper use. The tool is not
intended for commercial use.
TECHNICAL SPECIFICATIONS (see fig 1)
Model
CSS-12Li (DC51933)
Charger
Input:220-240V~ 50/60Hz, 50W
Voltage
12Vd.c.
Output:12Vd.c., 2.4A
Speed
0-27000 /min
Declared sound pressure level
LpA: 84.3dB(A), KpA=3dB(A)
Stroke length
20mm
Declared sound power level
LwA: 95.3dB(A), KwA=3dB(A)
Cutting capacity
Wood:
ø80mm
Vibration
a
h,B
=7.845m/s
2
, K=1.5m/s
2
Steel: 10mm
a
h,WB
=9.154m/s
2
, K=1.5m/s
2
Insulation class
III
Weight:
1,4kg
Battery pack
12Vd.c. 2000mAh
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Pull out mains plug immediately, if the mains
cable is damaged, entangled or severed.
Always remove the mains plug before
working on the device.
Read the manual.
Wear ear protection.
Wear eye protection
Wear breathing protection
Electrical appliances must not be disposed of
with the domestic waste.
Protection class II
PRODUCT ELEMENTS (see fig 2)
1
Switch lock
9
Hand guard
2
Handle
10
Release (holding bracket)
3
Battery pack
11
Holding bracket
4
Release (battery pack)
12
Rapid charger
5
On / off switch
13
Status LED (green)
6
Saw blade
14
Status LED (red)
7
Shoe
15
LED battery indicator
8
Quick-action blade clamp
SAFETY
General Power Tool Safety Warnings
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers
to your mains operated (corded) power tool or battery-
operated (cordless) power tool.
