Reducing dust exposure:
WARNING
- Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
- Lead from lead-based paints,
- Crystalline silica from bricks and cement and other masonry
products, and
- Arsenic and chromium from chemically treated lumber.
• Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
• This also applies to dust from other materials such as some
timber types (like oak or beech dust), metals, asbestos. Other
known diseases are e.g. allergic reactions, respiratory diseases.
Do not let dust enter the body.
• Observe the relevant guidelines and national regulations for your
material, staff, application and place of application (e.g.
occupational health and safety regulations, disposal).
• Collect the particles generated at the source, avoid deposits in
the surrounding area.
• Use suitable accessories for special work. In this way, fewer
particles enter the environment in an uncontrolled manner.
• Use a suitable extraction unit.
• Reduce dust exposure with the following measures:
- do not direct the escaping particles and the exhaust air stream at
yourself or nearby persons or on dust deposits,
- use an extraction unit and/or air purifiers,
- ensure good ventilation of the workplace and keep
clean using a vacuum cleaner. Sweeping or blowing stirs
up dust.
- Vacuum or wash the protective clothing. Do not blow,
beat or brush.
SPECIAL SAFETY DIRECTIONS FOR MAINS
POWERED TOOLS
•
Pull the plug out of the socket before making any
adjustments, changing tools, maintaining or cleaning.
•
Avoid unintentional starting: Always unlock the
trigger switch if the machine is unplugged or in the
event of a power failure.
RESIDUAL RISKS
Even if properly operating and handling this electric tool,
some residual risks will remain. Due to its construction
and build, this electric tool may present the following
hazards:
a) Lung damage, if suitable respiratory protection is not
worn;
b) Cuts
c) Ear damage if working without ear protection.
d) Damage to your health caused by swinging your
hands and arms when operating the appliance for longer
periods of time or if the unit is not held or maintained
properly.
ASSEMBLY & OPERATION
To prevent accidental starting that could
cause serious personal injury, always disconnect the plug
from the socket before operation.
Mounting mixer rod with mixer head (Fig.3)
Align the thread head of mixer rod with the nut of mixer head,
and then screw into, and using the open-ended spanner to
faten it.
Mounting mixer rod onto the tool body (Fig.4)
Align the another end thread head of mixer rod with thetool
chuck, and then screw into, and using the open-ended spanner
to faten it.
Switching ON / OFF (see fig. 5)
Switching the appliance on:
♦ Press down the safety switch lock-off button (11) and
keep it pressed.
♦ Press down the switch trigger (10) and hold it. The tool
will keep running.
♦ To switch off the tool, just release the switch trigger (10).
Electronic speed adjustment (Fig 6)
This tool equipped with a electronic speed adjustment
features, to turn the adjustment wheel (9) forward or
backward to adjust the speed as you wish.
MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the motor. Regularly clean the machine
housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come
off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents
may damage the plastic parts.
The machine requires no additional lubrication. If a fault occur, e.g. after wear of a part, please contact your local dealer
’s service.
ENVIRONMENT PROTECTION
In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of the packaging
materials can be recycled. Take these materials to the appropriate recycling locations. Take your unwanted machines to your
local dealer. Here they will be disposed of in an environmentally safe way.
Li-ion batteries can be recycled. Deliver them to a disposal site for chemical waste so that they can be recycled or
disposed of in an environmentally friendly manner.
Discarded electric appliances are recyclable and should not be discarded in the domestic waste! Please actively
support us in conserving resources and protecting the environment by returning this appliance to the collection
centres (if available).
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in conformity with the following standards or standardized
documents: EN62841-1:2015, EN62841-2-10:2017, EN55014-1:2017, EN55014-2:2015, EN61000-3-2:2014, EN IEC61000-3-
2:2019, EN61000-3-3:2013, EN61000-3-3:2013/A1:2019; in accordance with the regulations 200
6/42/ЕEС, 2014/30/ЕEС.
