manualshive.com logo in svg

Worcester greenstar heatslave 18, Инструкция по эксплуатации

Поделиться
Скачать
Worcester greenstar heatslave 18 Скачать руководство пользователя страница 19

IN

S

TA

LL

AT

IO

N

INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER BOSCH

17

UNPACKING THE BOILER

8-716-106-252a (03.05)

IMPORTANT: All the previous Pre-Installation sections must be read and
requirements met before starting boiler or flue installation.

UNPACKING THE BOILER

Unpacking:

1  Cut the ties securing the carton to the pallet

taking care not to pierce the carton or cause

personal injury

2  Lift carton up and away from the boiler

 Remove the plastic bag and upper front

protection cover from the boiler and place safely

aside

3  Pull base of front panel (E) away from the

boiler to disengage ball stud connectors

 Lift front panel (E) upwards off the top

supporting ledge and store safely away from the

working area

4  Remove the bolts securing the boiler to the

transport pallet

 At least two or more persons are required to

remove the boiler from the pallet taking care not

to damage the boiler, panels or the floor.

At all times the correct method for handling

heavy objects should be strictly observed.

GENERAL HANDLING GUIDELINES:

Lift only a manageable weight, or ask for help.
When lifting, bend the knees, and keep the back

straight and feet apart.
Do not lift and twist at the same time.
Lift and carry items close to the body
Wear protective clothing and gloves to protect

from any sharp edges.

3

1

2

E

4

Содержание greenstar heatslave 18

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды